Installing the front brake pads

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

If applicable, observe the identification of the removed brake pads.
If the brake pads are worn on one side, they must not be mixed up.
Install the brake pads (1) in the brake caliper in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the brake caliper (3).
Replace screws (1).
Parts: Screws
Tighten the screws (1), if applicable, use hexagon head for counter support (2).

TIGHTENING TORQUE SPECIFICATIONS

Guide bolt (brake caliper on brake anchor plate)
M8 Replace screws.	tightening torque	35 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE FRONT BRAKE PAD WEAR SENSOR .
Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
Refer to COMMISSIONING/BEDDING IN (BRAKE) NEW BRAKE PADS AND BRAKE DISCS .