Installing the front brake pads (high brake)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Remove the protective film of the adhesive layer (1) at the brake pads.
The adhesive layer (1) must not be taped.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert brake pads into the brake caliper.
The adhesive layer must not tap the brake piston.
Position the retaining clip (2) .
Drive in locking pins (1) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.