Installing hot film air mass meter
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Insert and install the hot film air mass meter (3).
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Hot film air-mass meter to intake filter housing | ||
|---|---|---|
| TS4x16 | tightening torque | 1.5 Nm |
- Connect and lock the connector (1).
- Make sure the connector (1) engages audibly.
When replacing the hot film air mass meter: Resetting the adaptation value
- Reset the adaptation value for the air mass system with the diagnostic system.