Remove right rear wheel arch cover
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Removing rear wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the rear right wheel
Removing the wheel
- If several wheels are removed simultaneously: Use a piece of chalk to mark on each tire the axle and side on which the corresponding wheel is fitted.
- Release the lug bolts (arrows) and remove the wheel.
Use the matching adapter from tool set 0 492 518 (36 1 300) (wheel bolt adapter set) to release and tighten down the lug bolt with security code .
Removing rear wheel arch trim
NOTE: To provide a better overview: Schematic diagram with partially hidden components. - Remove the blind rivets (1).
- Detach the wheel arch trim (2) from the clips (3).
- Detach and remove the wheel arch trim (2) from the locks on the bumper.
- Unscrew all bolts and nuts (arrows).
- Carefully feed out and remove the wheel arch cover (2).