Notes for removing and installing tie rod ear clips (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 32 1 260
NOTE:
The work steps are show on assorted components.
Ear clip must always be replaced.
Ear clip must always be replaced.
To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.
The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.
Hook the hook fastener and press ear together with special tool 32 1 260.
The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.
Attention!
Gap (A) max. 1 mm!