LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M240i 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Maintenance And General Information -- Repair X2 (F39)) >> 00 02 Lifting, Towing The Vehicle >> 00 02 000 Raising vehicle with trolley jack (X2 sDrive 28i 2018-2022)

00 02 000 Raising vehicle with trolley jack (X2 sDrive 28i 2018-2022)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Observe the following trolley-jack-related notes: 

  1. Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may be used!
  2. Trolley jacks must be regularly serviced and always checked for functional reliability before they are used!
  3. Check the rubber plate on the trolley jack prior to each use, replacing if necessary.
G09844058Courtesy of BMW OF NORTH AMERICA, INC.
WARNING: The vehicle may be raised with a trolley jack only  at the following mounting point!
  1. Center of front axle support

    Risk of damage! 

    Align the rubber plate on the trolley jack with the front axle support so as to prevent contact with and therefore damage to the underbody protection.

    G12948350Courtesy of BMW OF NORTH AMERICA, INC.
  2. Cross-member/bridge screw connection, rear axle support