Tires: checking and if necessary correcting inflation pressure, checking condition, tread depth and pattern (X2 2018-2023)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Checking tire pressure:
- Check tire pressure in accordance with label on B-pillar
Check tire condition:

Check tread depth of all tires with tire tread gauge
Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
Check tread wear pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work

NOTE:

For details of approved wheel and tire combinations, refer to KSD CD
For reason of driving safety, only use tires of the same design and tire tread on a single vehicle
Inform customer of any incorrect or worn tires