LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M240i 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Maintenance And General Information -- Repair X2 (F39)) >> 00 00 Maintenance >> 00 00 009 Pre-delivery check (X2 2018-2023)

00 00 009 Pre-delivery check (X2 2018-2023)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Quality assurance by BMW Service 

Model:
Vehicle identification number:
 
(Please tick where appropriate)
If necessary Quick Reference Guide:
Discussed and handed over
Included with the vehicle: Owner's Handbook(s)
Maintenance record booklet (with national-market version Korea only)
Vehicle key/remote key
If necessary - spare key
The vehicle document case is left in vehicle the vehicle: Glove box
Storage box
Luggage compartment

I hereby confirm that I have received the vehicle in perfect condition.

Place and date Signature of vehicle owner

Pre-delivery check by BMW Service 

Scopes of inspection: 

To be kept with the workshop documents

The following work must be carried out on the vehicle by BMW Service prior to delivery.

Model:

Vehicle identification number:

Scopes of inspection: to be kept with the vehicle documents
Accessory items OK. Not OK not present
install other enclosed parts scope (only in Market China: Take high-visibility jacket out of the luggage compartment and stow it in the storage compartment of the driver's door)      
If part of the accessories kit package: Installing on board device for electronic toll collection (dual chip toll function OBU) (in case of equipment specification with SA4VE Electronic toll system) (only in Chinese market)
Assembly instructions
     
Using BMW Group diagnosis system  OK  . Not OK  not present 
Carry out "CBS pre-delivery check" in the Service Function path under Maintenance      
Deactivate transportation mode      
Perform the following additional work only with SA5GB: Activating stolen vehicle tracking(1).      
Reset average mileage/kilometers driven      
Enter first registration      
Set on-board date      
Set statutory inspection dates(1).      
Enter service telephone numbers      
BMW TeleServices(1): Activate      
Navigation system(1): Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary.      
Check battery, observe notes in the diagnosis system, if applicable, charge battery      
Delete fault memory      
Carry out vehicle test, eliminate faults if necessary      
Engine compartment  OK  . Not OK  not present 
Check for cleanliness      
NOTE: It is possible that the cooling system has been filled above the maximum mark ex works. Do not adjust the coolant level. The normal coolant level is reached while driving the vehicle.
     
Fluid tank for washer fluid  OK  . Not OK  not present 
Check fluid level and top up if necessary, where required with antifreeze additive      
Labels  OK  . Not OK  not present 
Apply label for BMW Group Mobile Service      
Body, interior equipment, vehicle underbody  OK  . Not OK  not present 
Check for transportation damage      
Spring blocker (1)  OK  . Not OK  not present 
Remove      
Tires  OK  . Not OK  not present 
Checking tire pressure      
Observe the information on tolerance compensation for RDC.      
Initialize Run Flat Indicator (RPA) or tire pressure control (RDC)      
For winter tires(1) attach the label V-max.      
Maintenance record booklet (1)  (with national-market version Korea only)  OK  . Not OK  not present 
Stamp pre-delivery check/enter vehicle identification number      
Attach documentation (glove box/storage box/luggage compartment)  OK  . Not OK  not present 
Rider's Manual      
Maintenance record booklet (with national-market version Korea only)      
Contact booklet      
BMW Group Mobile Service brochure      
Include key/remote control (make note of number)      
Indicator/warning lights and Check Control  OK  . Not OK  not present 
Check and remove fault if applicable      
Service and parking brake  OK  . Not OK  not present 
Transport and immobilization periods of 3-6 weeks: Check for correct operation      
In event of transportation and immobilization periods of more than 6 weeks:
Brake in
     
Interior mirror with digital compass (1)  OK  . Not OK  not present 
Calibrate system      
Transportation lock (1)  and vehicle cleaning  OK  . Not OK  not present 
REMOVING THE TRANSPORTATION PROTECTIVE FILM .      
Clean inside and outside of vehicle      
(1) Denotes optional extra or national-market version. Observe possible changes in this regard.

Notes: 

Date Mechanic Workshop Supervisor