Removing the belt tensioner
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
Preliminary work
- Refer to REMOVING THE INTAKE FILTER HOUSING .
- Refer to REMOVING CLEAN AIR PIPE .
- Refer to REMOVING CHARGE AIR LINE .
- Refer to REMOVING FAN COWL .
- Refer to REMOVING THE DRIVE BELT FOR ALTERNATOR .
- Tension belt tensioner at hexagon head (1) up to stop.
- Remove special tool 0 496 268 (11 0 390)
.
- Loosen screws (1).
- Remove belt tensioner (2).