Installing the belt tensioner
- Position belt tensioner (2).
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Belt tensioner to alternator | ||
|---|---|---|
| M8 x 30 | Tightening torque | 28 Nm |
- If applicable, tension the belt tensioner at the hexagonal head (1) up to the stop.
- If applicable, secure the belt tensioner in place with special tool 0 496 268 (11 0 390) .
Follow-up work
- Refer to INSTALLING THE DRIVE BELT FOR ALTERNATOR .
- Refer to INSTALLING FAN COWL .
- Refer to INSTALLING CHARGE AIR LINE .
- Refer to INSTALLING CLEAN AIR PIPE .
- Refer to INSTALLING INTAKE SILENCER HOUSING .