26 20 000 Removing and installing front propeller shaft (2' Series coupe/convertible models with AWD)
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
IMPORTANT:
On four-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of.
Necessary preliminary tasks:
- Refer to REMOVING REAR UNDERBODY PROTECTION .
Release screws (1).
Tightening torque 26 11 7AZ .
Installation note:
Replace screws (1).
Release screws.
Tightening torque 26 11 7AZ .
Remove propeller shaft.
Installation note:
Replace screws.