1251 ENGINE WIRING HARNESS (M240i and M240i xDrive coupe/convertible)
1251 TIGHTENING TORQUE OVERVIEW
| Cable duct to intake plenum | ||
| Tightening torque | 4 Nm | |
| Front ground cable to cylinder head | ||
| M6 | Tightening torque | 8 Nm |
| Wiring harness mounting to highly integrated electrified drive topology | ||
| Tightening torque | 8 Nm | |
| Wiring harness section for transmission to cylinder head | ||
| M6x16 | Tightening torque | 8 Nm |
| Wiring harness to crankcase | ||
| M6x20 | Tightening torque | 5 Nm |