Remove rear spoiler
NOTE:
TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
RISK OF DAMAGE
Mechanical effects .
Paint damage .
Mechanical effects .
Paint damage .
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
- Guide in separating cord (approx. 50 cm) from special tool 2 357 248 into special tools 2 326 501 .
- Carefully feed in the separating cord from the side below the rear spoiler (1).
- Carefully release the rear spoiler (1) with the special tool 2 326 501 by tensile movements from the tailgate and remove it in an upwards direction.
- Remove any adhesive residue from the tailgate.CONSUMABLE DESCRIPTION
Adhesive remover 1|, Can 83110009712