5161 Reinforcement, Body

5161 REINFORCEMENT, BODY - TIGHTENING TORQUE SPECIFICATION

	Type	Thread	Tightening specifications	Dimension
1AZ Suspension cross brace to body	F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F87	M10	Replace screws. Tightening torque Angle of rotation	56 Nm 90°
2AZ Rear trailing link	F31/F34/F36	M10	Replace screw.	56 Nm
2AZ Rear trailing link	F31/F34/F36	M12	Replace screw. Tightening torque Angle of rotation	100 Nm 90°
3AZ Strut, front partition wall	F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F87			19 Nm
4AZ Front end strut to body	F23/F33/F87			28 Nm
5AZ Diagonal strut to adapter plate	F33		Tightening torque Angle of rotation	56 Nm 90°
6AZ Torsion strut to front axle support	F23/F33	M10	Replace screws Tightening torque Angle of rotation	56 Nm 45°
7AZ Torsion strut to side member	F23/F33	M12	Replace screws Tightening torque Angle of rotation	100 Nm 90°
8AZ Rear tension strut to cross member of luggage compartment floor	F33/F23		Replace screw	56 Nm
9AZ Rear tension strut to support	F33/F23		Replace screw. Tightening torque Angle of rotation	100 Nm 90°
10AZ Rear tension strut to side member	F33/F23		Replace screw Tightening torque Angle of rotation	100 Nm 90°
11AZ Carbon brace on lock support	F80/F82/83		Replace screw.	28 Nm
12AZ Carbon brace on strut brace	F80/F82/F83		Replace screw.	28 Nm
13AZ Cross-brace to spring strut dome	F80/F82/F83	M8		28 Nm
14AZ Cross-brace to side panel	F80/F82/F83	M10		34 Nm
15AZ Cross-brace to firewall	F80/F82/F83	M10x25	Replace screw. Tightening torque Angle of rotation	56 Nm 90°
16AZ Cross-brace extension/additional strut to cross-brace	F80/F82/F83	M8		28 Nm
17AZ Cross-brace extension to body	F80/F82/F83	M10		56 Nm
18AZ Additional strut to cross-brace extension	F80/F82/F83	M8		28 Nm
19AZ Torsion strut to front adapter plate	F23/F33	M10	Replace screw. Tightening torque Angle of rotation	56 Nm 90°
20AZ Torsion strut to body	F23/F33	M8		19 Nm
21AZ Engine firewall, bottom to body	F20/F21	M8x18		19 Nm
22AZ Rollover protection bar to body	F82 GTS	M8x16		19 Nm
23AZ Rollover protection bar to body	F82 GTS	M10x30		38 Nm

5161 TIGHTENING TORQUE OVERVIEW

Tension strut to body
M10 Replace screws.	Joining torque	56 Nm
	Angle of rotation	90°