Install upper heat shield
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Position heat shield.
- Tighten the screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to heat shield M6 Tightening torque 10 Nm - Tighten the screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to heat shield M6 Tightening torque 10 Nm - Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to heat shield M6 Tightening torque 10 Nm - Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to heat shield M6 Tightening torque 10 Nm - Position holder.
- Tighten the screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Holder for acoustic cover to cylinder head cover M6 Tightening torque 10 Nm