For replacements: Remount the camshaft position sensors
- Unscrew the bolt from the camshaft position sensor (1) .
- Remount the camshaft position sensor (1) for the exhaust camshaft to the new cylinder head cover.
TIGHTENING TORQUE SPECIFICATIONS
| Camshaft position sensor to cylinder head cover | ||
| TS5x20 | Tightening torque | 4 Nm |
- Unscrew the bolt from the camshaft position sensor (2) .
- Remount the camshaft position sensor (2) for the intake camshaft to the new cylinder head cover.
TIGHTENING TORQUE SPECIFICATIONS
| Camshaft position sensor to cylinder head cover | ||
| TS5x20 | Tightening torque | 4 Nm |