Remove The Outer Section Of The B-Pillar

• Mark severance cut (1)  to (3)  according to schematic diagram and disconnect. Thereby disconnect only the outer panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release welded connections in areas (1)  .
  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00... Releasing bonded connections
• Open spot-welded adhesive joints in areas (2)  .
• Release bonded connection in area (3)  .
• Detach and remove the outer section of the B-pillar from the cavity sealing (4)  .

Courtesy of BMW OF NORTH AMERICA, INC.