Remove rear mid-range speaker
Precondition
- Adjust rear seat backrest fully to the front.
Preliminary work
- Refer to REMOVING THE CENTRAL SEAT SURFACE .
- Refer to REMOVING THE TWO SEAT SURFACES .
- Refer to REMOVING BOTH C-PILLAR TRIM PANELS .
- Refer to REMOVING BOTH SEAT BELT FINISHER STRIP ELEMENTS .
- Refer to REMOVING THE REAR WINDOW SHELF OF THE COMFORT REAR SEAT .
- Refer to REMOVING THE STORAGE SHELF WITH ROLLER SUNBLIND .
- Remove the cover (1) using the special tool 0 496 571 (00 9 327)
.
- Loosen screws (1).
- Place the mid-range speaker (2) on the storage shelf.
- Disconnect the connector (1).
- Remove the mid-range speaker (2).