Install upper trim strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Check detents for damage.
The detents must not be damaged.
- Attach the trim strip (1) and snap into the latch mechanisms (arrows).
Follow-up work
- Refer to INSTALLING THE TRIM ON THE SIDE BUMPER COVER .
- Refer to INSTALLING THE ORNAMENTAL GRILLE ON THE BUMPER COVER ON THE SIDE .
- Refer to INSTALLING FOG LIGHT SUPPORT .
- Refer to INSTALLING BUMPER COVER, FRONT .
- Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
- Refer to INSTALLING FRONT ORNAMENTAL GRILLE .