Install the central information display (CID)

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .

Position and connect the connector (1) to the central information display (CID) (2).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Insert the central information display (CID) (2) in the dashboard and tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Central information display to dashboard
Screw	tightening torque	1.8 Nm

Follow-up work