Install the engine support arms on the engine mounts on the left and the right
NOTE:
TECHNICAL INFORMATION
Lower the engine completely to prevent play before bolting down the engine mount and the engine support bracket.
Lower the engine completely to prevent play before bolting down the engine mount and the engine support bracket.
Install the engine support arms on the engine mounts on the left and the right
NOTE:
TECHNICAL INFORMATION
Lower the engine completely to prevent play before bolting down the engine mount and the engine support bracket.
Lower the engine completely to prevent play before bolting down the engine mount and the engine support bracket.
- Tighten screw (1)
engine mounting bracket on the right from the top.TIGHTENING TORQUE SPECIFICATIONS
Engine support bracket on the engine mount M12x1.5x40 tightening torque 100 Nm - Tighten screw (1) left engine mounting bracket using special tool 0 493 751 (11 9 150) from the bottom.
TIGHTENING TORQUE SPECIFICATIONS
| Engine support bracket on the engine mount | ||
| M12x1.5x40 | tightening torque | 100 Nm |
Follow-up work
- Refer to ATTACHING THE UNIVERSAL JOINT TO STEERING GEAR .
- Refer to INSTALLING THE REINFORCEMENT STRUT ON THE LEFT ENGINE MOUNT .
- Refer to INSTALLING THE REAR SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE COVER OF THE STEERING ASSEMBLY .
- Refer to INSTALLING REAR UNDERBODY PROTECTION .
- Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
- Refer to INSTALLING THE REAR THRUST FIELD .
- Refer to INSTALLING FRONT STIFFENING PLATE .
- Refer to ATTACHING THE FRONT LEFT WHEEL .
- Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
- Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
- Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT CENTER .
- Refer to TAKING HOOD OUT OF THE SERVICE POSITION .
- Refer to INSTALLING ACOUSTIC COVER .
- Refer to RESETTING THE TIRE PRESSURE MONITOR .