1111 ENIGINE BLOCK (M760i xDrive 2017-2022)
1111 TIGHTENING TORQUE OVERVIEW
| Crankshaft bearing cap to crankcase (ASA collar screw) | ||
| M11x102 Replace screws. Screw in hand-tight. |
Joining torque | 20 Nm |
| Angle of rotation | 115° | |
| Crankshaft bearing cap to crankcase (ASA collar screw 10.9) | ||
| M8X70 Replace screw. |
Joining torque | 10 Nm |
| Angle of rotation | 55° | |
| Crankshaft bearing cap to outer crankcase | ||
| M8X37 | Joining torque | 10 Nm |
| Angle of rotation | 45° | |
| Ground cable to engine block | ||
| M6 | tightening torque | 8 Nm |
| Oil nozzle to crankcase | ||
| Hexagon socket screw | Tightening torque | 3 Nm |
| Spacer screw of oil pump | ||
| Spacer screw | Joining torque | 10 Nm |
| Angle of rotation | 45° | |
| Threaded support sleeves | ||
| tightening torque | 6 Nm | |