Install the DME control unit of cylinders 1 to 4

• Position the DME control unit (2)  .
• Clip in the adapter plate at the detents (1)  downwards.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fix wiring harness fasteners (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector in the area (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the connectors (1)  downwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVER OF THE RIGHT DME CONTROL UNIT .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .