Installing right door lock

• Attach the Bowden cable nipple (2).
• Attach the Bowden cable (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert door lock (2).
• Connect the connector on the door lock (2).
• Tighten down screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door lock to door
  screw	Tightening torque	8.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (4).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door lock to door
  screw	Tightening torque	8.8 Nm

• Clip in locking rod (1).
• Connect the connector to the drive for the soft-close automatic function (1).
• Fasten the drive for the soft-close automatic function (1) on the door.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE MODULE BRACKET ON THE FRONT OF THE DOOR (PART INSTALLATION) .
• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE DOOR TRIM PANEL .
• Refer to INSTALLING THE MIRROR TRIANGLE COVER .
• Refer to INSTALLING THE WEATHER STRIP ON THE FRONT DOOR  .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .