Remounting the ultrasonic sensor for the Parking Maneuvering Assistant (PMA)
- Unlock the detents (1) .
- Remove the ultrasonic sensor (2)
for the Parking Maneuvering Assistant (PMA) towards the top.
Remove all other ultrasonic sensors for the Parking Maneuvering Assistant (PMA) together with the wiring harness.
- Engage all ultrasonic sensors for the Parking Maneuvering Assistant (PMA) in the new bumper.
- Secure wiring harness.
Follow-up work
- Refer to INSTALLING THE REAR BUMPER COVER .
- Refer to INSTALLING BOTH TRIM PIECES FOR THE EXHAUST TAILPIPE .
- Refer to INSTALLING THE TRIM ON THE REAR BUMPER PANEL .
- Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL, LEFT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to ON VERSION WITH COMPACT SPARE WHEEL: INSTALLING THE STORAGE TRAYS .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .