LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2018
>>
740e xDrive
>>
Repair and Diagnosis
>>
Suspension
>>
Rear Suspension
>>
Integrated Suspension Systems -- Repair (G12)
>>
37 11 Control And Suspension Elements, Front
>>
37 11 510 Removing and installing/replacing front active anti-roll bar (740i xDrive 2017-2022, 740e xDrive PHEV 2017-2019, 745e xDrive PHEV 2020-2022, 750i xDrive 2016-2022, M760i xDrive 2017-2022)
>>
Releasing the wiring harness from the active stabilizer
Releasing the wiring harness from the active stabilizer
Unlock and disconnect the plug connections (1) and (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the bolt (1) on the front axle support and slide the wiring harness mounting to the side.
Courtesy of BMW OF NORTH AMERICA, INC.
Release the screw (1) and thread out the wiring harness.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.