Lower front axle support

If installed on left: Remove spray guard 

• Loosen screw (1)  from spray guard.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  from spray guard (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Leave the spray guard (1)  loose on output shaft (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Lower the front axle support (1)  by dimension (A)  .

  Dimension (A)  = maximum of 10 cm

Courtesy of BMW OF NORTH AMERICA, INC.