Removing the right throttle body

Preliminary work 

• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING RIGHT INTAKE SILENCER HOUSING .
• Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
• Refer to REMOVING THE COVER OF THE REAR RIGHT ENGINE COMPARTMENT .
• Refer to REMOVING THE SEAL FOR THE HOOD REAR .
• Refer to REMOVING LEFT AND RIGHT WIPER ARM .
• Refer to REMOVING THE COWL COVER .
• Refer to REMOVING TRAILING LINK AT SPRING BOLT .
• Refer to REMOVING THE COWL UPPER PART IN THE CENTER .

• Loosen screw (1).
• Loosen the oil dipstick tube (2) from the cylinder head cover.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen the screw (1) below the throttle body.
• Release the cable from the clamp (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and detach the tank vent line (1) on the air duct.
• Unlock connector (2) and detach from throttle body.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unfasten clamp (1).
• Loosen screw (2).
• Loosen the cable (3) from the throttle body.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Pull out and remove the throttle body from the charge air pipe (2).

Courtesy of BMW OF NORTH AMERICA, INC.