Remove the DME control unit of cylinders 1 to 4

Preliminary work 

• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING THE COVER OF THE RIGHT DME CONTROL UNIT .

• Unlock and disconnect the connector (2)  with a suitable screwdriver (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and disconnect the plug connections in area (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1)  and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the wiring harness mountings (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the adapter plate at the detents (1)  and remove in an upward direction.
• Remove the Digital Motor Electronics control unit (2)  towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.