Installing the DME control unit

• Feed in and install DME control unit (2)  .

  The locks (1)  must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1)  in the arrow direction.

  The connectors (1)  must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slide the cover (1)  in the direction of the arrow into the guide (2)  and install it.
• Lock clamp (3)  .

  The clamp (3)  must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to IF THE DME CONTROL UNIT IS REPLACED: PROGRAM/CODE DME CONTROL UNIT .