Install the soft-close motor on the trunk lid

• Install the soft-close motor (4)  together with the cable (2)  .
• Clip the soft-close motor (4)  into the holders (3)  .
• Attach the cable (2)  .
• Connect the plug connection (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL, LEFT .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .