Remove the center console trim
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Attach protective film (1) to gear selector switch (GWS).CONSUMABLE SPECIFICATION
Protective cover
"Vehicle protection" picture panel8319 2 350 087 - Unclip the center console trim (1) upwards with the special tool 0 496 569 (00 9 325) .
- Turn the center console trim (1) towards the side and remove it via the gear selector switch (GWS) (2).
- Unlock all plug connections and disconnect.
- Remove center console trim (1).