Install the optional equipment system (SAS)

Connect connector (1) .

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the optional equipment system (SAS) (3) .
Replace the plastic nuts (1) and (2) .
Parts: Plastic nuts
Install the nuts (1) and (2) and tighten.

TIGHTENING TORQUE SPECIFICATIONS

Optional equipment system (SAS) to body
Replace plastic nut.	Tightening torque	4 Nm

G14194091

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .
Refer to PROGRAM/ENCODE THE OPTIONAL EQUIPMENT SYSTEM (SAS) .