Install rear side window glass

• Insert side window glass (2)  twisted by 90° to the front, into the door from the top.
• Insert the side window glass (2)  on to the top of the door.
• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Side window, rear
  screw	Tightening torque	2.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Side window, rear
  screw	Tightening torque	7.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the window guide rail (2)  in the door.
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Window guide rail
  screw	Tightening torque	2.3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the rubber window seal (1)  in the window guide rail (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PARTIALLY INSTALLING THE COVER ON THE WINDOW FRAME .
• Refer to INSTALLING REAR DOOR WINDOW GLASS .
• Refer to INSTALLING REAR WINDOW CHANNEL STRIP .
• Refer to INSTALLING WINDOW FRAME TRIM OF REAR DOOR .
• Refer to INSTALLING THE FRAME TRIM ON THE WINDOW FRAME OF THE REAR DOOR .
• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE REAR DOOR TRIM PANEL  .