11 33 062 Removing and installing/replacing all hydraulic valve clearance compensating elements (HVC) (N63O1)

Special tools required: 

• 11 4 480

Necessary preliminary work: 

• Remove all rocker arms  . See 11 33 052 REMOVING AND INSTALLING/REPLACING ALL ROCKER ARMS ON LEFT SIDE (N63O1)  and 11 33 054 REMOVING AND INSTALLING/REPLACING ALL ROCKER ARMS, RIGHT (N63O1) .

Remove hydraulic valve clearance compensating elements (1) in direction of arrow.

If the valve clearance compensating elements are to be reused, set them down in an orderly fashion on special tool 11 4 480 .

Fig 1: Removing Hydraulic Valve Clearance Compensating Elements

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.