12 14 12 Replacing pulse sensor on left exhaust camshaft (S63 B44 T 0)

(cylinder bank 5 to 8) 

Necessary preliminary tasks: 

• Read out fault memory of the DME control unit, work through test plans if necessary.
• Switch off ignition.
• Remove left INTAKE FILTER HOUSING
  Fig 1: Identifying Connector And Pulse Generator

  Courtesy of BMW OF NORTH AMERICA, INC.

Partially release wiring harness if necessary.

Unlock connector (1) and remove.

Release screw (2).

Tightening torque 13 62 3AZ .

Remove pulse generator (3).

Installation note: 

Replace sealing ring and coat with lubricant.