Secure the spring strut on the wishbone on the bottom left and right

Secure the spring strut to the bottom wishbone 

• Position the spring strut on the bottom of the wishbone.
• Replace the bolt (2) and the nut (1).

  Parts:  Bolt, nut

• Insert the screw (2).
• Tighten nut (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Lower wishbone to spring strut clevis
  M14 Replace screw and nut. Tighten in NORMAL POSITION .	Joining torque:  165 Nm
  	Angle of rotation:  90°

  Courtesy of BMW OF NORTH AMERICA, INC.