LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 530e xDrive >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Technical Data - 530I, 530I XDRIVE, 540I, 540I XDRIVE (G30)) >> 17 00 Cooling, Test >> 17 00 COOLING, TEST (530e 2021-2022, 530e xDrive 2021-2022)

17 00 COOLING, TEST (530e 2021-2022, 530e xDrive 2021-2022)

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2022 BMW 540i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
1700 TECHNICAL DATA OVERVIEW

Coolant level 
  Overfill quantity of coolant (above the maximum mark in the high-temperature expansion tank  + 200 ml
Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed)  + 100 ml
Filling capacity of high-temperature coolant circuit G30 PHEV/G31 PHEV 
  B46B20O1 (PHEV)/B48B20M1 (PHEV)  6 I
     
Filling capacity of low-temperature coolant circuit G30 PHEV/G31 PHEV/G38 PHEV 
  B48B20M1 (PHEV)/B46B20O1 (PHEV)  2.6 I
High-temperature coolant circuit filling capacity 
  B48B20O1/B46B20O1  9.0 I
Opening pressure of sealing cap/test pressure of cooling system of high-temperature coolant circuit 
  Pressure relief valve opens when the pressure exceeds the ambient pressure.  min. 1.4 bar
Electric changeover valve must open at latest when the pressure is lower than the ambient pressure  max. 0.1 bar
Test pressure for cooling system (gauge pressure)  1.5 bar
Opening pressure of sealing cap of low-temperature coolant circuit 
  Pressure relief valve opens when the pressure exceeds the ambient pressure.  min. 1.4 bar
Electric changeover valve must open at latest when the pressure is lower than the ambient pressure  max. 0.1 bar
Test pressure for cooling system (gauge pressure)  1.5 bar
Test conditions for coolant level 
  Coolant must be cooled down