11 25 PISTON WITH RINGS AND BOLTS (M550i xDrive 2020-2022)
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2022 BMW 540i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
1125 TECHNICAL DATA OVERVIEW
| Permissible total wear tolerance between piston and cylinder (engine operated) | ||
| Piston installation clearance (piston worn) | 0.25 mm | |
| Piston diameter | ||
| Measure the piston diameter at distance (A) from the lower end of the piston skirt. | Distance (A) to the lower end of the piston skirt | 18 mm |
| Nominal dimension of piston diameter | 88.987 +0.02-0.02 mm | |
| Piston installation clearance (piston new) | ||
| Piston installation clearance (piston new) | 0.003... 0.023 mm | |
| Piston ring 1st groove A | ||
| Side clearance. | 0.02... 0.07 mm | |
| Piston ring 1st groove H | ||
| Annular groove height. | 1.21... 1.24 mm | |
| Piston ring 1st groove S | ||
| End clearance. | 0.15... 0.30 mm | |
| Piston ring 2nd groove A | ||
| Side clearance. | 0.015... 0.06 mm | |
| Piston ring 2nd groove H | ||
| Annular groove height. | 1.51... 1.53 mm | |
| Piston ring 2nd groove S | ||
| End clearance. | 0.30... 0.50 mm | |
| Piston ring 3. Groove-A DSF ring | ||
| Side clearance without spiral expander. | 0.02... 0.06 mm | |
| Piston ring 3. Groove-A U-flex ring | ||
| Side clearance without spiral expander. | 0.02... 0.08 mm |
| Piston ring 3rd groove H | |
| Annular groove height. | 2.01... 2.03 mm |