11 11 ENGINE BLOCK (530e PHEV 2018-2022, 530e xDrive PHEV 2021-2022)
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2023 BMW 540i xDrive, 2023 BMW 540i, 2023 BMW 530i xDrive, 2023 BMW 530i, and 2022 BMW 540i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
1111 TECHNICAL DATA OVERVIEW
| Cylinder bore | ||
| Distance of the upper edge of the cylinder path to the measuring point | 0 mm... 60 mm | |
| Diameter of cylinder bore | 82.000 mm... 82.014 mm | |
| Permitted irregularity of the cylinder bore | 0.007 mm | |
| Distance of the upper edge of the cylinder path to the measuring point | 60 mm... 80 mm | |
| Diameter of cylinder bore | 82.008 mm... 82.022 mm | |
| Permitted irregularity of the cylinder bore | 0.007 mm | |
| Distance of the upper edge of the cylinder path to the measuring point | 80 mm... 115 mm | |
| Diameter of cylinder bore | 82.021 mm... 82.037 mm | |
| Permitted irregularity of the cylinder bore | 0.007 mm | |
| Distance of the upper edge of the cylinder path to the measuring point | 115 mm... 135 mm | |
| Diameter of cylinder bore | 82.033 mm... 82.057 mm | |
| Permitted irregularity of the cylinder bore | 0.010 mm | |
| Cylinder bore B36/B38/B42/B46/B48/B58 | ||
| Diameter of cylinder bore | 82.000 mm...82.014 mm | |
| Permitted irregularity of the cylinder bore | 0.01 mm | |
| Permitted conicity of the cylinder bore | 0.01 mm | |
| Permissible total wear tolerance between piston and cylinder bore (engine operated) | 0.15 mm | |