Installing the ignition coils
NOTE:
RISK OF DAMAGE
Damage to the catalytic converter due to misfiring .
An incorrectly mounted ignition coil can loosen during engine operation, thereby causing misfiring .
Damage to the catalytic converter due to misfiring .
An incorrectly mounted ignition coil can loosen during engine operation, thereby causing misfiring .
- Ensure that the sealing lip fits correctly on the ignition coil so that it can seal correctly. Do not crush the sealing lip.
NOTE:
The description is for one component only. The procedure is identical for all further components.
- Insert and install the ignition coil (3).
- Tighten down screw (2).TIGHTENING TORQUE SPECIFICATIONS
Ignition coil M6x31.8 Tightening torque 8 Nm - Connect and lock the connector (1).
The connector (1) must engage audibly.