18 20 Exhaust System Bracket/Intermediate Pipe
18 20 EXHAUST SYSTEM SUSPENSION - TIGHTENING TORQUE SPECIFICATION
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ Exhaust system to catalytic converter |
B48 |
Ribbon cable clamp |
Replace flat band clip. |
28 Nm |
| B48 |
V-band clamp |
Replace V-band clamp. |
22 Nm |
| 2AZ Exhaust system to transmission |
B48 |
M8 |
Replace nut. |
19 Nm |
| 3AZ Rear silencer to body |
B48 |
M8 |
Replace nuts. |
19 Nm |
| 4AZ Clamp to exhaust system |
B48 |
M10 |
|
45 Nm |
| 5AZ Holder of gasoline particulate filter to transmission |
B48 |
M8 |
|
19 Nm |
| Reinforcement plate to body |
| M8 |
|
28 Nm |