Install fan cowl
Prerequisite
Ignition is switched off.
- Feed in and install the fan cowl (5)
in the direction of the arrow.
The lock (4) must audibly engage.
- Tighten down screw (3)
.TIGHTENING TORQUE SPECIFICATIONS
Fan cowl on radiator D6X20 6 Nm - Secure clamps (2) .
- Connect and lock the connector (1) .
The connector (1) must engage audibly.
Follow-up work:
- Refer to INSTALLING CLEAN AIR PIPE .
- Refer to INSTALLING INTAKE SILENCER HOUSING .