11 41 OIL PUMPS WITH STRAINER AND DRIVE (440i, 440i xDrive, 440i GranCoupe, 440i GranCoupe xDrive)
1141 TIGHTENING TORQUE OVERVIEW
| Hydraulic valve to crankcase | ||
| M6x18 | Tightening torque | 8 Nm |
| Oil intake manifold to oil pump | ||
| Hexagon screw M6x25 | 8 Nm | |
| Oil pump to crankcase | ||
| External Torx socket M8x35 | Tightening torque | 19 Nm |
| Sprocket wheel at the oil vacuum pump | ||
| Torx socket M8x1.25LHx35 Replace screw. Left-hand thread! |
Joining torque | 5 Nm |
| Angle of rotation | 90° | |
| Sprocket wheel at the oil vacuum pump | ||
| M8 Important - left-hand thread Replace screw. |
1. Joining torque | 5 Nm |
| 2. Angle of rotation | 90° | |