Removing and installing/replacing trim for tailgate hinge on left or right (4' Series Coupe)
Gently press together trim panel for hinge (1) in area of tabs (2) and open tabs (2).
Installation note:
Tabs (2) must not be missing or damaged.
Pull out trim panel for hinge (1) from tailgate trim panel (2) and feed out of hinge.
Installation note:
Catches (3) on trim for hinge (1) must not be missing or damaged.
Installation note:
Pin (1) must be inserted in corresponding opening in hinge.
On vehicle versions before 03/2012, it is possible hinges are installed without a corresponding opening.
On replacement of trim panel (2), pin (1) must possibly be removed.