Installing the trim panel for the pedal mechanism

• Check the clips (1)  and the guides (2)  for damage and replace if necessary.
• Check the speakers (3)  and the footwell light (4)  and replace if necessary.
• Insert the guides (2)  into the corresponding holder on the vehicle.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the trim panel for the pedal mechanism (2)  toward the top and clip the clips (3)  into the instrument panel.
• Tighten the screws (1)  .

TIGHTENING TORQUE SPECIFICATIONS

Trim panel for the pedal mechanism on the support for the instrument panel
	4.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.