Removing and installing/replacing complete interior roof light (front) (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Special tools required: 

• 00 9 325 

Necessary preliminary tasks: 

Only version with roof switch cluster: 

• Remove ROOF SWITCH CLUSTER .

For interior roof light equipment: 

Carefully lever out interior roof light (1) with special tool 00 9 325  in direction of arrow.

Unlock and disconnect associated plug connection, remove interior roof light (1).

Installation note: 

Make sure interior roof light (1) is correctly seated.

Courtesy of BMW OF NORTH AMERICA, INC.

For roof switch cluster equipment: 

Release interior roof light (1) at clamps (2) and feed out of roof switch cluster (3).

Installation note: 

Clips (2) must not be missing or damaged.

Make sure interior roof light (1) is correctly seated in roof switch cluster (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• If necessary, convert BULB .
• Note BULB TYPE .