Removing and installing/replacing additional brake light (4' Series Coupe/Convertible)
Release cover for additional brake light (1) from clip (2).
Release cover for additional brake light (1) at retaining hook (3) and remove.
Installation note:
Clips (1), guides (2) and retaining hooks (3) on the cover for additional brake light (4) must not be damaged.
Make sure cover for additional brake light (4) is correctly seated.
Unfasten plug connection (1) and disconnect.
Unlock the slide (2) in the direction of the arrow and remove the additional brake light (3) from the rear window.
Installation note:
Make sure additional brake light (3) is correctly positioned on rear window.