Removing and installing/replacing left socket housing for rear light (on side wall) (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)
WARNING:
Follow instructions for handling light bulbs (EXTERIOR LIGHTS) .
Necessary preliminary tasks:
- Remove REAR LIGHT .
Release catches (1).
Remove socket housing (2) from rear light (3).
Installation note:
Catches (1) must not be damaged or missing.
Make sure socket housing (2) is correctly seated on rear light (3).
Installation note:
Gasket (3) on socket housing (4) must not be missing or damaged.
Replacement:
Carefully press bulb for turn indicator (1) and bulb for brake light (2) into socket housing (4), turn in direction of arrow and remove from socket housing (4).
Note BULB TYPE .