Removing and installing/replacing left turn indicator insert (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Necessary preliminary tasks: 

• Partially detach FRONT WHEEL ARCH COVER (FRONT SECTION) .

Detach ventilation (1).

Unfasten screws (2).

Tightening torque 1.65 Nm

Pull turn indicator insert (3) out of headlight.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect plug connections (1) at turn indicator insert (2).

Installation note: 

The seal (3) must not be damaged or missing.

Ensure gasket (3) is fitted correctly.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Teach in turn indicator insert with vehicle diagnosis.

• Service functions
• Body
• Lights
• Initialize the headlight driver module and teach in LEDs in headlight